User's Manual

41
 LENGTH: The length of the target ship, the unit of LENGTH is “m” (meters).
 BEAM: The beam of the target ship, the unit of BEAM is “m” (meters).
 DESTINATION: The destination of the target ship.
 ETA: Estimated Time of Arrival, (Month/Date/Hour/Minutes)
 SHIPTYPE: Ship type of the target ship.
 CARGO: Cargo information.
4.3.2 Block 2: Main Menu
This block contains the program menu of the AIS Viewer.
4.3.2.1 File
Click on “File”, and the window is shown as the below picture. (Refer to figure 4-3-2-1)
Figure 4-3-2-1-1 Menu Tree under File
“Connect AIS”: Click on “Connect AIS”, and the “Config AIS Serial Port” window would pop
up (Refer to figure 4-3-2-1-2). Please select the proper Serial Port and the
desired Baud Rate (CAMINO-101 default Baud Rate: 115,200). Click on
to connect AIS serial port. And click on to
complete the setting.
Figure 4-3-2-1-2 Config AIS Serial Port