User's Manual

4 AMEC AIS VIEWER DESCRIPTION

4.1 RS-232 Serial Port Selection

Please follow below steps to ensure the serial port is correctly selected if needed.

1. Please use RS-232 port to connect with PC and AMEC AIS if desired.

*NOTE: CAMINO-101 can also be connected to the USB ports of PC/Laptop through

RS-232/USB converter (not included in the accessory kit; purchase separately).

Please install the USB driver before connecting to the USB ports.

2. Go to My Computer / Control Panel / System / Hardware / Device Manager / Ports

(COM&LPT).

3. Click on Ports (COM&LPT) in the Device Manager, and then find the possible COM port

number for your PC.

Figure 4-1 Serial Port Setting

4. Back to the AIS Viewer Program, please select “File” tab and click “Connect AIS”. Please

select the suitable serial port number in the pop out window.