User's Manual

33
Step 7: Setting Review
(1) Click on “VIEW” tab.
(2) Click on the “Read Device” button, all the device setting information will be displayed in
text format, including MMSI, static, voyage, transceiver, and baud rate data.
(3) Review and reconfirm if the data has been appropriately set.
(4) If specific data was not properly set, go to that specific tab to make further revision. And
then, come back to “VIEW” tab, to see the latest data.
(5) After review and reconfirmation, click on to complete the whole setting and to
escape from this AMEC AIS Configuration software.
Figure 3-3-7 Setting Review