User's Manual

32
Step 6: Baud Rate Setting
(1) Click on “BAUD RATE” tab.
(2) The default baud rate for RS-232 is 115200, enter your desired baud rate if
necessary.
(3) The default baud rate for NMEA is 38400, enter your desired baud rate if necessary.
(4) Click on to confirm and complete the setting.
(5) To perform other setting, click on specific tab to go further.
(6) To escape from the AMEC AIS Configuration software, click on “EXIT”.
Figure 3-3-6 Baud Rate Setting