User's Manual

29
Step 3: Static Data Setting
(1) Click on “STATIC” tab.
(2) Enter your CALL SIGN and NAME.
(3) Select the “DIMENSION SETTING” to fill in the dimension of your own ship.
(4) Click on to confirm and complete the setting.
(5) To perform other setting, click on specific tab to go further.
(6) To escape from the AMEC AIS Configuration software, click on “EXIT”.
Figure 3-3-3 Static Data Setting
FOR USERS IN THE UNITED STATES OF AMERICA ONLY
WARNING: The entry of static data into this device shall be performed by
the vendor of the device or by an appropriately qualified person in the
business of installing marine communications equipment on board vessels.