User's Manual

28
Step 2: MMSI Setting
(1) Click on “MMSI” tab.
(2) Check and select “MMSI” button.
(3) Enter your MMSI (Maritime Mobile Service Identity) number in the designated square
area.
(4) Click on to confirm and complete the MMSI setting.
(5) To perform other setting, click on specific tab to go further.
(6) To escape from the AMEC AIS Configuration software, click on “EXIT”.
Figure 3-3-2 MMSI Setting
! WARNING: MMSI can only be input once, please make sure and input the correct MMSI.
FOR USERS IN THE UNITED STATES OF AMERICA ONLY
WARNING: It is a violation of the rules of the Federal Communications
Commission to input an MMSI that has not been properly assigned to the
end user, or to otherwise input any inaccurate data in this device.