User's Manual

12
IV. Remarks
Step 1:
Connect the power cable to
the power input and turn on
the CAMINO-101 by
switching to “ON”.
III. Start-Up Setting
Set up the GPS and VHF
Antenna in an appropriate
spot.
(Refer to Section 2.2)
1
The power voltage of
CAMINO-101 is 24V DC.
Use an adaptor if the supply
voltage is not within the
range.
2
Step 2:
Check if the POWER
indication light is
working properly.
Please refer to Section 3.1
2
INCORRECT INPUT
VOLTAGE WILL
DAMAGE THE
EQUIPMENT!
Figure 2-2-3-6 Installation instruction
2
1
1