User's Manual

*NOTE: CAMINO-101 SUPPLIES ONLY 3.3V FOR GPS ANTENNA. PLEASE NOTED WHEN

CONNECTING WITH A 5V GPS ANTENNA WOULD CAUSE SIGNIFICANT DAMAGE.

AN AMEC GPS ANTENNA IS HIGHLY SUGGESTED.

Step 3:

II. Cabling Instructions

Step 1:

Connect the GPS cable

to the GPS ANT *

Step 2:

Connect the VHF cable

to the VHF ANT .

Connect NMEA 0183

compatible system to the

NMEA interface .

Figure 2-2-2-3 Cabling instructions

GPS Antenna

Connector:

Female TNC

type

VHF Antenna

Connector: M

Jack

Power

RS-232

NMEA 0183

Step 4:

Connect either RS-232

or Bluetooth antenna to

your computer if needed.

* DO NOT CONNECT

THE TWO

INTERFACES

SIMULTANEOUSLY.

Step 6:

Connect the Power cable

to the PWR .

Step 5:

Pairing Bluetooth to your

computer if needed.

(Please refer to 2.7).

Bluetooth (Optional)

Step 7:

Open the CAMINO-101by

switching to “ON”