User's Manual

14
 Avoid the antenna be surrounded by any obstacle or metal object due to signal interference.
 Do not stabilize the VHF antenna with metal holder.
 The bottom of the VHF antenna is the signal receiving blind spot.
 Keep the antenna cable as short as possible.
 The antenna cable diameter should be 5D/8D or even better ones.
 Avoid bare wire winding & insulating tape wrapping when connecting with extended antenna
cable.
Installation Process
1) Place the VHF antenna mounting bracket on a rigid surface and install the antenna.
2) Install the coaxial cable from the antenna to the AtoN location.
3) Connect the cable to the AtoN device.
Surge absolver
Lightning arrestors should be used in all antenna cables if there is a risk of lightning strike.