User's Manual

8
3 Programming Your Vessel Data
3.1 USB Driver Installation
The USB driver should be installed before configuring the vessel data with the AIS
Configuration Software. PC/laptop can also be a convenient platform to display AIS
targets with compatible software like AIS Viewer.
Required Items
 USB Driver (included in the software CD)
 USB cable (included in the box)
 PC/Notebook with Windows operating system (not included)
Currently CAMINO-108 USB Driver only supports Windows XP, Windows
Vista, Windows 7, and Windows 8.
 One available USB port on PC/Notebook
 Available CD-ROM drive on PC/Notebook
Driver Installation
With the transponder powered on and USB cable attached, plug in the USB cable to
PC/notebook. A new hardware found prompt will show up. Follow the on screen
instructions and assign the correct file path of the USB driver to complete the
installation.
You can also install the USB driver via the Device Manager in the Control Panel.
(Separately from this user manual, a detailed USB driver installation instruction
manual is supplied in the CD)