User's Manual
12
2 Installation
2.1 Installation Procedures
Please familiarize the manual content before installation. Depending on your hardware
configuration, use the following recommended steps to install the device.
1) Mount the device unit to an appropriate location
2) Install VHF antenna
3) Connect to VHF radio (B600S only)
4) Connect to FM radio (B600S only)
5) Install GPS antenna
6) Connect to a chart plotter via NMEA 0183 and/or other instruments
7) Connect to a chart plotter via NMEA 2000 and/or other instruments
8) Connect to a Tx switch box and/or external alarm system (optional)
9) Connect to an appropriate power source (12V / 24V DC, 2A)
Figure 1 External Connections