User's Manual

9
2 Installation
2.1 Installation Procedures
Please familiarize the manual content before beginning the installation. Depending on
your hardware configuration, use the following recommended steps for installation.
1) Mount the transponder unit to an appropriate location
2) Install VHF antenna
3) Connect to VHF radio
4) Connect to FM radio
5) Install GPS antenna
6) Connect to a chart plotter via NMEA 0183 and/or other instruments
7) Connect to a chart plotter via NMEA 2000 and/or other instruments
8) Connect to a Tx switch box (optional)
9) Connect to an appropriate power source (12V / 24V DC, 2A)
Figure 2 Connection Diagram