User's Manual

67
4.9.6 Password
This option enables changing user password. (Default password: “0000”)
Set the information with the order of “OLD PASSWORD”, “NEW PASSWORD”, “CONFIRM NEW PASSWORD”.
Turn knob to traverse the items and press knob to enter input mode. Under input mode, turn knob to select
text position and press knob to confirm. Repeat till all four values are entered.
Figure 88 Password
Pressing MENU or ESC button will ask whether to save data. Select YES to save and exit, or NO to exit without
saving.
4.9.6.1 Changing the Password
The password is required in some menu items due to information security. (Default password: “0000”) Please
go to Main MENU item Sys Config and select sub-menu item Password to change it. For password setting,
please refer to 4.5.6 PASSWORD.
Figure 89 Changing Password
PASSWORD SETTING
2013/01/17 07:18:11
Dangerous Targets : 0
NEW Password [ **** ]
Confirm Password [ **** ]
OLD Password [ **** ]
MENU
MESSAGES
NAV. STATUS
SHIP SETTING
TRANSCEIVER
SYS CONFIG
DIAGNOSTICS
MAIN MENU
CUSTOMIZE
RADAR VIEW
MAP CALIBRATION
SENSOR CONFIG
FACTORY
PASSWORD
SYS CONFIG
2013/01/17 07:18:11
Dangerous Targets :0
PASSWORD SETTING
2013/01/17 07:18:11
Dangerous Targets : 0
NEW Password [ **** ]
Confirm Password [ **** ]
OLD Password [ **** ]