User's Manual

65
4.9.3 Map Calibration
This setting offers user functions to calibrate map data. Turn knob to select either latitude or longitude to
offset. Press knob to enter input mode. Turn knob to select an offset value. Once finished press ESC to return
to the previous level to continue the setting.
Figure 84 Map Calibration
Pressing MENU or ESC button will ask whether to save data. Select YES to save and exit, or NO to exit without
saving.
4.9.4 Sensor Config
Sensor Configuration provides user to set port baud rates. Turn knob to select a port to modify and press
knob to change the specified port baud rate. Turn knob to change the desired rate. When finished, press knob
again to return to the previous level.
Figure 85 Baud Rate Setting
Pressing MENU or ESC button will ask whether to save data. Select YES to save and exit, or NO to exit without
saving.
BAUD RATE SETTING
2013/01/17 22:43:39
DISP <38400>
LR <38400>
DGPS <38400>
SEN 1 <38400>
SEN 2 <38400>
PILOT <38400>
SEN 3 <38400>
MENU
MESSAGES
NAV. STATUS
SHIP SETTING
TRANSCEIVER
SYS CONFIG
DIAGNOSTICS
MAIN MENU
CUSTOMIZE
RADAR VIEW
MAP CALIBRATION
SENSOR CONFIG.
FACTORY
PASSWORD
SYS CONFIG
2013/01/17 07:18:11
Please enter the password and
hold KNOB for confirmation.
[ **** ]
PASSWORD
Dangerous Targets :0
MAP CALIBRATION
2013/01/17 22:43:39
Targets Received: 3
LON OFFSET [+0.000000]
LAT OFFSET [+0.000000]
TX POWER LEVEL: 12.5W