User's Manual

58
4.7 Ship Setting
This sub-menu lists all the ship information settings of your ship. There are a total of 4 setting commands.
Figure 70 Ship Setting
4.7.1 Own Ship
To access OWN SHIP setting, you are required to enter your password (The default password is 0000).
Choose a text location, and then press the knob to enter text input mode. Turn the knob to select a character,
and then press the knob to confirm and to return. Repeat these steps till all desired characters are entered.
After entering the password, press down the knob for 3 seconds to confirm.
Figure 71 Own Ship
MENU
MESSAGES
NAV. STATUS
SHIP SETTING
TRANSCEIVER
SYS CONFIG
DIAGNOSTICS
MAIN MENU
OWN SHIP
VOYAGE
CPA/TCPA
CHANGE MMSI/IMO
RETRY TIMES
SHIP SETTING
2013/01/17 07:18:11
Dangerous Targets :0
Please enter the password and
hold KNOB for confirmation.
[ **** ]
PASSWORD
MENU
MESSAGES
NAV. STATUS
SHIP SETTING
TRANSCEIVER
SYS CONFIG
DIAGNOSTICS
MAIN MENU
OWN SHIP
VOYAGE
CPA/TCPA
CHANGE MMSI/IMO
RETRY TIMES
SHIP SETTING
2013/01/17 07:18:11
Dangerous Targets :0