User's Manual

17
3.10 Configuring CAMINO-701
The following items must be completed before initial configuration.
1. Ensure VHF and GPS antennas are well connected to the transponder main unit.
2. Ensure the 37-pin-connector extension cable is well connected from the transponder main unit to the
junction box.
3. Ensure the power cable is well connected and supplied with stable voltage/current power source.
4. Ensure applicable external devices are well connected through the junction box.
3.10.1 Initial Configuration
The initial configuration, particular, MMSI (Maritime Mobile Service Identity) number must be done before
operation. The following initial configuration is required:
1. Setup 1: MMSI should be correctly programmed.
Figure 11 Built-in Test
2. Step 2: Press MENU and select main menu item SHIP SETTING. (Password required, default is
“0000”)
Power…………………..…….…………[PASS]
Flash..…………………..…….…………[PASS]
Built-in Test
Transmission inhibited!
Only Receiving Function available!
Set MMSI right now?
YES NO
MMSI unregistered