User's Manual

p.58
17. How to charge the MP3 player
Operation type Operation
image
Descriptions
Before charging See “How to connect the MP3 player to the PC” for the connection to the
computer.
When the USB port is connected: Connect the MP3 player to the PC or the charge adapter.
The AC plug seen at the right top part is a battery charge lamp.
During the charge, the battery level display is moving up and down at the right top part.
When the charging is completed: After the charging, the AC plug icon seen at the right top
disappears with the battery level display seen filled up.
When the USB port is disconnected: If the edge of the blue MENU button (on the MP3 player)
shows blinking blue light, this means data is being sent. DO NOT disconnect the MP3 player
from the PC during the time. If so, the MP3 player may work abnormally, with the data lost.
Caution! Depending on the type of the main board in the PC, the battery may not be fully
charged and/or the charge icon may not disappear.
Charging time: About 3 - 3.5 hours (Based on discharged/unused state)
- Make sure to use the USB cable provided by Alltec Electronics only.