User's Manual

p.48
Operation type LCD display Used button Descriptions
Recording This screen initially appears in the voice recording mode.
When you press and hold the REC button for about three seconds, the recording will start.
* If available memory is not sufficient during the recording, a message “DISK FULL” appears
with the last file stored.
Check recording time When you quickly press the center of the MENU key during the
recording, the LCD screen will display the available recording/ongoing recording time on the top.
* Recording time
- Current file will be stored in 9 hours, 59 minutes, and 59 seconds with the recording continuing
with another file.
Pause recording When you press the REC button quickly, the recording will pause. If pressed
again, the recording will go back on.