Owner`s manual

15
D
: STARTING THE OPERATOR
WIRING A SINGLE BUTTON / DELUXE WALL
STATION
WARNING: Never install a push button station in a position
where a user could conceivably reach through the gate to access the
device.
Mount the pushbutton station in a secure area within 100 feet of the
operator.
FINAL INSTALLATION CHECKLIST
1. Use a voltmeter to assure the service voltage to the
operator is 115 VAC. Connection to 220 VAC service is
the most common cause of board failure in new
installations and is NOT COVERED BY WARRANTY!
2. No accessory equipment is installed in the control box.
3. All wires attached to the 3 or 6 position terminal strip
are well clear of the moving parts under the unit cover.
3. The junction box cover is securely fastened .
Figure 17: Sensing Mechanism & Limit Cam Mounting
103701b1
Figure 18: Mounting
Limit Cams to Chain
103701b2