Use and Care Manual

Page 5
blaster. Check nameplate for rated amps.
2. Operator’s responsibilities before starting:
 Inspect fittings and hoses for damage and wear.
 Check the seal on all doors. Only operate the blast cabinet with all doors securely closed
and dust collection system running.
 Clean dust from dust collector and clean filter as needed.
3. Caution:
 Unless otherwise specified, working pressure of blast machine and related components
must not exceed 110 PSI.
 Keep blast nozzle controlled and aimed at the work.
4. Maintenance:
 Keep your machine in good repair. Use ALLSOURCE parts and do not substitute or modify
ALLSOURCE supplied items.
IMPORTANT NOTICE
TO DISTRIBUTORS, PURHCASERS AND END USERS OF ALLSOURCE PRODUCTS
The information provided described and illustrated in this material is intended for experienced,
knowledgeable users of abrasive blasting equipment and supplies (products).
The products described in this material may be combined as determined solely by the user in a variety of
way and purposes. However no representations are made as to intended use, performance standards,
engineering suitability, safe practices or compliance with government regulation and laws that apply to
these products, products of others, or a combination of various products of third parties, and a
combination of various products chosen by the user or others. It is the responsibility of the users of these
products, products of third parties, and a combination of various products, to exercise caution and
familiarize themselves with all applicable laws, government regulations and safety requirements.
Nor are representations made or intended as to the useful life, maintenance cycles, efficiency or
performance of the referenced products or any combination of products.
This material must not be used for estimating purpose. Production rates, labor performance or surface
finishes are the sole responsibility of the user based on the user’s expertise, experience and knowledge
of industry variables.
It is the responsibility of the user to insure that proper and comprehensive training of operators has been
performed and all environmental and safety precautions observed.
ALLSOURCE provides a variety of excellent products to the surface preparation industry, and we are
confident that all proficient users, operators and contractors in this industry will continue to use our
products in a safe and knowledge manner.