Product Manual

Page 6
IMPORTANT NOTICE
TO DISTRIBUTORS, PURHCASERS AND END USERS OF ALLSOURCE PRODUCTS
The information provided described and illustrated in this material is intended for experienced,
knowledgeable users of abrasive blasting equipment and supplies (products).
The products described in this material may be combined as determined solely by the user in a variety of
way and purposes. However no representations are made as to intended use, performance standards,
engineering suitability, safe practices or compliance with government regulation and laws that apply to
these products, products of others, or a combination of various products of third parties, and a
combination of various products chosen by the user or others. It is the responsibility of the users of these
products, products of third parties, and a combination of various products, to exercise caution and
familiarize themselves with all applicable laws, government regulations and safety requirements.
Nor are representations made or intended as to the useful life, maintenance cycles, efficiency or
performance of the referenced products or any combination of products.
This material must not be used for estimating purpose. Production rates, labor performance or surface
finishes are the sole responsibility of the user based on the user’s expertise, experience and knowledge
of industry variables.
It is the responsibility of the user to insure that proper and comprehensive training of operators has been
performed and all environmental and safety precautions observed.
ALLSOURCE provides a variety of excellent products to the surface preparation industry, and we are
confident that all proficient users, operators and contractors in this industry will continue to use our
products in a safe and knowledge manner.
Before using this product, read all instructions, literature, labels, specifications and warnings sent with
and affixed to the unit. If operation of the unit is unclear after reading this manual, contact your
supervisor for instructions. It is the responsibility of the employer to read the following instructions to
users of this equipment, who are unable to read. Periodic inspection at the work site should be made
by supervisory personnel to ensure the blast machine is being properly used and maintained. A copy of
this owner’s manual must be kept with the blast machine and readily accessible to the blast machine
operators at all times.