Specifications

Wall‐mountedInfraredMultiTouchScreenDisplayUser’sManual
Page15
  
2. Set Up
2.1 Connecting to PC
The touch screen must be connected to the PC in two ways: visually and interactively.The
recommendedvisualconnectionisviatheVGACable(included)meaningthatthedisplayactslike
amonitorforthePC.ThetouchfunctionisachievedbylinkingtheInfraredtouchsensorsaround
thescreento
thePCviatheUSBCable(included).


Figure5ScreentoPCConnections
IMPORTANT:BesuretoconnectthePCtotheUSBportonthesideoftheinputpanelandNOT
theoneadjacenttotheotherinputs.


ConnectthescreentothePCviatheVGAcableandUSBCable(asshownabove).Oncethese
connectionshavebeenmadeand
thePCpoweredONtakethepowerleadandinsertitintothe
screenandconnecttomainsoutlet.TheunitwillpowerONautomatically.Beforetakingany
more steps ensure that the screen is sourcing its display from the PC.This is done by first
pressing“MODE”andthenscrollingdowntothedesiredinputsource(PC)andselectbypressing
“→”.
Computer Touchscreen Description
VGAOutput VGAinput Computerdrivesthevideodisplayonthemonitor
TouchInput(USB) TouchOutput(USB) Feedback from the touch monitor to the PC on
wherehasbeentouchedonthescreen