Technical data
4
SAFETY NOTICE
This equipment has been designed to minimize exposure of personnel to
hazards. While the ScanX is designed for safe operation, certain precautions
must be observed. Use of the ScanX not in conformance with the instructions
specified in this manual may result in permanent failure of the unit.
General Safety Information.
Check with your authorized dealer for packing material requirements if
it is necessary to return the product to the manufacturer. Correct pack-
ing guarantees optimal safety of the device during transport. Should it
become necessary to return the device to the manufacturer during the
warranty period, Air Techniques will not accept claims for damage arising
from using incorrect packing materials.
Before every use, the operator must check the functional safety and the
condition of the device.
The operator must be knowledgeable in the operation of the device.
This device is not to be used in any areas where the atmosphere could
cause fire or explosion.
Markings.
The following terms or symbols are used on the equipment, on the serial
number label or in this manual to denote information of special importance:
Alerts users to important Operating
and Maintenance instructions. Read
carefully to avoid any problems.
Warns users that uninsulated voltage
within the unit may be of sufficient
magnitude to cause electric shock.
Indicates item
used only
once. Discard after use.
2
MEDICAL ELECTRICAL EQUIPMENT
WITH RESPECT TO ELECTRICAL SHOCK, FIRE,
MECHANICAL AND OTHER SPECIFIED HAZARDS ONLY
IN ACCORDANCE WITH
UL-60601-1, CAN/CSA C22.2 NO.601.1
66CA
C
L
A
S
S
I
F
I
E
D
DANGER
AVOID DIRECT
EXPOSURE TO BEAM
LASER RADIATION WHEN OPEN
CAUTION
CLASS 1 LASER PRODUCT
CLASS 3B LASER
RADIATION WHEN OPEN
AVOID EXPOSURE TO BEAM
CLASS IIIb LASER PRODUCT
COVER REMOVED MAKES
THIS DEVICE A
The ScanX is a Class I Laser Product
[Class 1 Laser Product (IEC)]
This warning label identifies the ScanX as such a product and
describes the potential danger to humans in the event the product is
opened during service. There is no laser radiation from this product
when operated and maintained as instructed.
The Laser Product Accession Number is 0212282-00
Indicates date of manufacture.
Identifies the name of the
manufacturer.