Operator`s manual

10
SITE SELECTION
The ScanX may be located almost anywhere. Follow these guidelines for optimum performance:
 Lighting conditions: You can set up the scanner in ordinary room light, however, direct
sunlight and light fixture(s) above and near the ScanX producing more than 400 lux of
light at the PSP inlet or outlet must be avoided.
 Provide a standard cabinet with a countertop large enough for scanner installation, plus
provide a working area for resting and opening cassettes.
 Locate the computer within 6 feet.
 Access to a grounded electric Mains AC or Power Inverter Assembly outlets must be within
the length of the line cord provided. A line cord matching Mains outlet of country of
intended use is provided.
Note: An authorized ALLPRO Imaging dealer or user must provide appropriate
and compliant computer hardware and software.
COMPUTER SYSTEM REQUIREMENTS
IMPORTANT: To operate the ScanX, it must be connected to a compliant Computer
System, and the computer must be loaded with ALLPRO Imaging Authorized
Image Management Software. ALLPRO Imaging provides neither the PC nor
the Software. The PC and Software are provided by the dealer or user.
The Computer System (laptop or computer, monitor, etc.) and any related peripheral or other
equipment, supplied by the user, or a third party, must comply with the requirements for accessory
Equipment as specified in the appropriate IEC 601-1 and/or IEC 601-1-1 harmonized national
standard.
The minimum computer system requirements necessary to operate the ScanX are listed below. Items
listed with an asterisk (*) are required.
Operating System:
* Windows 2000 Professional for an Intel 32-bit processor
with Service Pack 4 or later, or Windows XP Professional
for an Intel 32-bit processor with Service Pack 1 and the
KB B22603 update or later.
USB Port: * Must be USB 1.1 or 2.0 or later
CPU: 2.8 GHz Pentium IV
RAM: 1 GB
Hard Drive: 120 GB
Monitor: SVGA 17”, 1024 x768 or higher resolution, contrast ratio
450:1,
1024 x 768 Resolution: .22 dot pitch capability.
For optimum viewing a CRT is recommended.
Video Display Adapter: 32 MB RAM
Peripherals:
* CD ROM Drive
Standard Keyboard & Mouse
Backup Device
External Surge Protector
Power supply backup
Image Management Software: * Compatible software