Technical data
Table Of Contents
- FOREWORD
- TABLE OF CONTENTS
- CONGRATULATIONS
- WARRANTY
- ON-LINE REGISTRATION
- SAFETY NOTICE
- IMPORTANT INFORMATION
- PURPOSE OF THIS MANUAL
- SYSTEM DESCRIPTION
- UNPACKING & INSPECTION
- COMPUTER SYSTEM REQUIREMENTS
- CONTROLS & INDICATORS
- TECHNICAL DATA
- ABBREVIATIONS
- SITE SELECTION
- SYSTEM SETUP
- PLATE CARE & PREPARATION
- IMAGING PROCEDURES
- POWERING DOWN THE SYSTEM
- MAINTENANCE
- SCHEDULED MAINTENANCE
- TROUBLESHOOTING
- ACCESSORIES
- IF YOU NEED ASSISTANCE
9
UNPACKING & INSPECTION
Unpacking
The ScanX is shipped in a very special shipping case covered by a double-wall
corrugated over-packaging. The case is to be returned to Air Techniques, Inc./
ALLPRO Imaging using a Return Material Authorization (RMA) number. Retain
the over-packaging to return the shipping case. If the case is kept to protect the
ScanX during transport or future shipping, the dealer will be invoiced.
Included System Components
The ScanX consists of the model and accessory kit as listed below:
(See TECHNICAL DATA for ratings and identification.)
Inspection
Verify that all listed items were received. If any item is missing, notify your authorized
dealer. Unpack each component of the ScanX and inspect for physical damage
such as scratched panels, damaged connectors, etc. If any damage is noted,
notify your authorized dealer immediately so corrective action can be taken.
Description ScanX,
P/N B7350-214S
ScanX,
P/N B7350-550G
Main ScanX 12 ILE Assembly B7310-HR B7310
Accessory Kit containing:
24 V Power Supply Adapter B7095 B7095
Line Cord 73096 73096
Computer Connector Cable, USB B3554 B3554
Instruction Manual B7319 B7319
PSP Protective Cushion Kit 74030B 74030B
ScanX Cleaning Sheet Sample Kit B2030 B2030
Drivers, Utilities and Instruction Manual Disk: B7359 B7327