Specifications

AS-Interface slaves
Motor starters for operation in the field, high degree of protection
SIRIUS M200D motor starters
General data
6/97
Siemens IK PI · 2012
6
■ Overview
SIRIUS M200D AS-i Basic motor starters with manual on-site operation
The intelligent, highly flexible SIRIUS M200D motor starters for
distributed configurations are designed to start, monitor and
protect motors and loads up to 5.5 kW.
The M200D motor starters are available in four versions:
✓ Function is available
-- Function is not available
Basic functionality
All M200D motor starter versions have the following functions:
• Available as direct-on-line and reversing starters in a rugged
design
• Electromechanical or solid-state switching version
• Little variance – only 2 device versions up to 5.5 kW thanks to
wide range setting
• All versions have the same enclosure dimensions
• Degree of protection IP65
• Quick and failsafe wiring of system and motor cables using
ISO 23570 plug-in connector technology (Q4/2 and Q8/0)
• Robust and widely used M12 connection method for digital
inputs and outputs
• Integrated feeder connector monitoring
• Full motor protection through overload protection and a
temperature sensor (PTC, TC)
• Short-circuit and overload protection integrated
• Integrated repair switch lockable with 3 locks
(multi-level service)
• Uniform wiring to the G110D/G120D frequency converters
and to the ET 200pro distributed peripherals system
• Extensive diagnostics concept using LEDs
• Optional integrated manual on-site controller with
key-operated switch (ordering option)
• Optionally available brake actuation with voltages from
180 V DC (no rectifier needed in motor) or 230/400 V AC
(order versions)
■ Benefits
M200D motor starters provide the following advantages for cus-
tomers:
• High plant availability through plug-in capability of the main
circuit, communication and IOs – relevant for installing and
replacing devices
• Cabinet-free construction and near-motor installation thanks
to the high degree of protection IP65
• The motor starters record the actual current flow for the pa-
rameterizable electronic motor overload protection. Reliable
messages concerning the overranging or underranging of
setpoint values for comprehensive motor protection. All motor
protection functions can be defined by simple parameteriza-
tion
• Low stock levels and low order costs through a wide setting
range for the current or a wide setting range for the electronic
motor protection of 1:10 (only 2 device versions up to 5.5 kW)
• The integrated wide range for the current enables a single
device to cover numerous standard motors of different sizes
• Comprehensive offering of accessories, including ready-
assembled cables
• The M200D motor starters can be installed with a few manual
steps The integrated plug-in technology significantly reduces
the wiring outlay:
preassembled cables can be plugged directly onto the motor
starter module
• Easy and user-friendly installation because all versions have
the same enclosure dimensions
• Fast and user-friendly commissioning using an optional man-
ual on-site controller
• Increase of process speed through integrated functions such
as "Quick-Stop" and "Disable Quick-Stop", e.g. at points and
crossings
• Optional manual on-site controller with momentary-contact
and latching operation for easier start-up and easier service
■ Application
The high degree of protection IP65 makes the M200D motor
starters suitable in particular for use on extensive conveying sys-
tems such as are found in mail sorting centers, airports, automo-
tive factories and the packing industry.
For simple operating mechanism tasks, particularly in conveyor
applications, the new SINAMICS G110D frequency converter
series with a performance range from 0.75 kW to 7.5 kW and de-
gree of protection IP65 is the ideal partner for the M200D motor
starters.
The SINAMICS G110D frequency converters permit continuous
speed control of three-phase asynchronous motors and meet
the requirements of conveyor applications with frequency con-
trol (for more information, see Catalog D 11.1 "SINAMICS G110,
G120 ...").
M200D
AS-i Basic
M200D
AS-i Standard
M200D
PROFIBUS
M200D
PROFINET
Motor control with
AS-i Communication PROFIBUS PROFINET
Mechanical or electronic switching
✓ ✓ ✓ ✓
Electronic switching with soft starter functionality
-- ✓ ✓ ✓
Kap_06_en.book Seite 97 Freitag, 2. September 2011 1:42 13
© Siemens AG 2011