Specifications

AS-Interface slaves
Motor starters for operation in the control cabinet
SIRIUS 3RA6 compact feeders
Accessories
6/86
Siemens IK PI · 2012
6
■ Selection and ordering data (continued)
1)
This terminal is connected in place of a switch,
please take the space requirement into account.
Conductor cross-section Tightening torque For compact
feeders and
motor starter
protectors
Solid or stranded Finely stranded
with end sleeve
AWG cables,
solid or stranded
mm² mm² AWG Nm Size
Order No.
Three-phase feeder terminals for three-phase busbars
3RV19 25-5AB
Connection from top
2.5 ... 25 4 ... 16 10-4 4 S0 3RV19 25-5AB
3RV19 15-5B
Connection from below
1)
2.5 ... 25 4 ... 16 10-4 Input: 4;
Output: 2 ... 2.5
S00, S0 3RV19 15-5B
Three-phase feeder terminals for constructing "Type E Starters" according to UL 508
for three-phase busbars
Connection from top
2.5 ... 25 4 ... 16 10-4 -- S0
3RV19 25-5EB
Version Order No.
Busbar adapters for 60 mm systems
8US12 11-1NS10
For flat copper profiles according to DIN 46433
Width: 12 ... 30 mm
Thickness: 4 ... 5 mm or 10 mm
8US12 11-1NS10
Device holders for lateral mounting along side the busbar adapter for 60 mm systems
8US12 50-1AA10
Required in addition to the busbar adapter for mounting a reversing starter
8US12 50-1AA10
Version Color of
handle
Version of
extension shaft
mm Order No.
Door-coupling rotary operating mechanisms for operating the compact feeder with closed control
cabinet doors
3RV29 26-0B
The door-coupling rotary operating mechanisms consist of a knob, a coupling driver and a
130/330 mm long extension shaft (6 mm x 6 mm). The door-coupling rotary operating mech-
anisms are designed to degree of protection IP65. The door interlocking prevents accidental
opening of the control cabinet door in the ON position of the motor starter protector. The OFF
position can be locked with up to 3 padlocks.
Door-coupling rotary
operating mechanisms
Black 130
3RV29 26-0B
EMERGENCY-STOP
door-coupling rotary
operating mechanisms
Red/yellow 130 3RV29 26-0C
Kap_06_en.book Seite 86 Freitag, 2. September 2011 1:42 13
© Siemens AG 2011