Specifications

AS-Interface slaves
Slaves
AS-Interface connections for LOGO!
6/73
Siemens IK PI · 2012
6
■ Overview
Every LOGO! can now be connected to the AS-Interface system
AS-Interface connections for LOGO!
Using the AS-Interface connection for LOGO!, an intelligent
slave can be integrated in the AS-Interface system. With the
modular interface it becomes possible to integrate the different
basic units in the system according to their functionality. Simi-
larly, functionalities can be quickly and easily adapted to new
requirements by exchanging the basic unit.
The interface module provides four inputs and four outputs on
the system. These inputs and outputs do not actually exist in
hardware terms, however, but are only virtually present through
the interface on the bus.
■ Selection and ordering data
Version Order No.
3RK1 400-0CE10-0AA2
AS-Interface connections for LOGO!
• 4 virtual inputs
• 4 virtual outputs
3RK1 400-0CE10-0AA2
Kap_06_en.book Seite 73 Freitag, 2. September 2011 1:42 13
© Siemens AG 2011