Specifications

ManualsBrandsAlloy ManualsComputer equipmentNetwork Device BWS-136

AS-Interface slaves

I/O modules for operation in the control cabinet

Introduction

6/63

Siemens IK PI · 2012

■

Overview

SlimLine S22.5/S45

F90 module

Flat module

For AS-Interface applications inside control cabinets there are

various module series for the most diverse requirements:

• SlimLine S22.5

• SlimLine S45

• F90 module

• Flat module

All modules of these series can be snap-mounted directly on a

standard mounting rail or be fastened using screws.

AS-Interface modules in IP20 have direct terminals for the

AS-Interface cables and therefore do not require a base.

For more information about these modules

see "Modules with Special Functions" from page 6/70

✓ Available

-- Not available

Series Spectrum Mounting on TH35 standard

mounting rails according to

EN 60715

Wall mounting using push-in

lugs

(Order No.: 3RP1 903)

Other possibilities

SlimLine S22.5

• 4I (standard and A/B modules)

•4O

• 2I/2O (steady-state/relay outputs)

• Counters

• Ground-fault detection modules

✓ ✓ --

SlimLine S45

• 4I/4O (steady-state/relay outputs)

• 4I/4O with floating I/Os

• 4I/3O (A/B modules)

• 4I/4O (A/B modules Spec. 3.0)

✓ ✓ --

F90 module

• 4I/4O (screw terminals)

• 4I/4O (connection using

Combicon connector)

•16I

✓ -- --

Flat module

• 4I/4O (screw terminals) -- -- Integrated lugs for screw fixing

IKPI_Kap06_07_Bit.fm Seite 63 Montag, 12. September 2011 12:15 12