Specifications

AS-Interface
Software
AS-Interface Function Block Library
for SIMATIC PCS 7
6/149
Siemens IK PI · 2012
6
■ Overview
AS-Interface function block library for SIMATIC PCS 7: User interface
The AS-Interface function block library for PCS 7 is integrated in
the SIMATIC PCS 7 process control system and expands it for in-
tegration of the AS-Interface system.
As the result, the advantages of AS-Interface such as the con-
siderable reduction of wiring outlay for distributed actuators/sen-
sors and very simple installation can also be used in a system
based on PCS 7.
The library contains modules for accessing the I/O data of
AS-i slaves, modules for diagnostics of the AS-i system, and a
faceplate for the PCS 7 Maintenance Station.
The AS-i CP 343-2 / CP 343-2P masters are supported within an
ET 200M station connected through PROFIBUS.
For direct connection to PROFIBUS it is possible to use
DP/AS-i Link Advanced as an AS-i single master and double
master.
Digital AS-i standard slaves and A/B slaves (according to
AS-Interface Specification V 3.0) can be used on the CP 343-2
and CP 343-2P.
In combination with DP/AS-i LINK Advanced it is also possible to
integrate analog AS-i slaves.
Hardware and software requirements
The library requires PCS 7 Version V 6.1, V 7.0 or V 7.1
Types of delivery and license
The function block library supplied on CD-ROM allows the user
to run the required engineering software on the engineering sta-
tion (single license) including the runtime software for executing
the AS modules in an automation system (single license).
If the AS modules are to be used in additional automation
systems, the corresponding number of runtime licenses are
required which are supplied without a data carrier.
■ Selection and ordering data
Version Order No.
AS-Interface function block library for PCS 7
3ZS1 635-1XX01-0YA0
Scope of supply
AS modules and faceplates for integrating
AS-Interface into the PCS 7 process control system,
for PCS 7 version V 6.1 V 7.0 or V 7.1
Engineering software
For one engineering station (single license)
including runtime software for execution of the
AS module in an automation system
(single license), German/English/French,
type of delivery:
CD incl. electronic documentation
3ZS1 635-1XX01-0YA0
Runtime software
For execution of the AS module in an
automation system (single license),
type of delivery:
License without software and documentation
3ZS1 635-2XX01-0YB0
Kap_06_en.book Seite 149 Freitag, 2. September 2011 1:42 13
© Siemens AG 2011