User`s manual

29
2.6.1 Get/Refresh the Latest Mirror Settings
Click the Mirror menu on the web page, the latest mirror settings on the switch will be displayed.
This page provides the following parameters
n Enable/Disable – Click the Enable option to enable mirroring function or the Disable option to
disable it.
n Mirroring Options – There are five options for each port:
Ø Capture – to set the corresponding port to be a capture (monitoring) port.
Ø Ingress&Egress – to set the corresponding port to be a monitored port to investigate
bi-directional traffic.
Ø Ingress Only – to set the corresponding port to be a monitored port to investigate only
ingress (receiving, Rx) traffic.
Ø Egress Only – to set the corresponding port to be a monitored port to investigate only
egress (forwarding, Tx) traffic.
Ø OFF – no mirroring function for the corresponding port. This is the default option.