User manual

GSS Series User Manual
Alloy Computer Products Pty Ltd Copyright ©2007
92
Appendix A
Technical Specifications
Hardware Specifications
 Standard Compliance: IEEE802.3/802.3ab / 802.3z / 802.3u / 802.3x
 Network Interface:
Configuration Mode Connector Port
10/100/1000Mbps Gigabit TP
NWay TP (RJ-45)
1 – 48
1000Base-SX Gigabit Fibre 1000 FDX *SFP 44-48 (Option)
1000Base-LX Gigabit Fibre 1000 FDX *SFP 44-48 (Option)
1000Base-LX Single Fibre WDM (BiDi)
1000 FDX *SFP
44-48 (Option)
*Ports 44-48 are TP/SFP fibre dual media ports with auto detection function
*Optional SFP module supports LC or BiDi LC transceiver
 Transmission Mode: 10/100Mbps support full or half duplex
1000Mbps support full duplex only
 Transmission Speed: 10/100/1000Mbps for TP
1000Mbps for Fibre
 Full Forwarding/Filtering Packet Rate: PPS (packets per second)
Forwarding Rate Speed
1,488,000PPS 1000Mbps
148,800PPS 100Mbps
14,880PPS 10Mbps
 MAC Address and Self-learning: 8K MAC address
256 VLAN table entries (Tag Based)
72 VLAN table entries (Port Based)
 Flow Control: IEEE802.3x compliant for full duplex
Backpressure flow control for half duplex
 Cable and Maximum Length:
TP Cat. 5e UTP cable, up to 100m
1000Base-SX
Up to 220/275/500/550m,
which depends on Multi-Mode Fibre type
1000Base-LX Single-Mode Fibre, up to 120Km
1000Base-LX WDM (BiDi) Single-Mode Single Fibre, up to 60Km