User manual

GSS Series User Manual
Alloy Computer Products Pty Ltd Copyright ©2007
64
3.16 Loop Detection
The loop detection function allows the switch to detect if a loop has been formed on your
network.
Fig. 3.46
Loop Detection: Tick the check box next to the corresponding port to enable loop
detection.
Action Enable: Used to enable the Loop detection function for the ports that have been
selected.
Apply Button: The Apply button must be pressed after making any changes to any of
the values on this screen.
Locked Port: If a port on the switch locks, you have the ability to unlock the port. Select
the port that has locked and press the Resume button.
Resume: Used to unlock ports.