User manual

GSS Series User Manual
Alloy Computer Products Pty Ltd Copyright ©2007
54
3.10 User Defined
The User Defined section is where you create your user defined functions when creating your
ACL rules. User Defined functions can be created for the Ethernet type and also the protocol
type.
Fig. 3.37
EtherType
State: Used to enable the user defined functions.
Value: Enter the Ethertype Value in the space provided.
IP Protocol
State: Used to enable the user defined functions.
Value: Enter the IP Protocol Value in the space provided. Eg. Port 25 for SMTP.
Apply Button: The Apply button must be pressed after making any changes to any of
the values on this screen.