User manual

GSS Series User Manual

RX Runt Packets: Displays the total number of runt packets received.

RX Oversize Packets: Displays the total number of oversize packets received.

RX CRC: Displays the total number of CRC error packets received.

RX Code: Displays the total number of Code packets received.

RX Fragment: Displays the total number of fragmented packets received.

TX Unicast: Displays the total number of unicast packets transmitted.

TX Multicast: Displays the total number of multicast packets transmitted.

TX Broadcast: Displays the total number of broadcast packets transmitted.

TX Pause: Displays the total number of pause packets transmitted.

TX 64 Bytes: Displays the total number of 64 byte frames transmitted.

TX 65 ~ 127 Bytes: Displays the total number of 65 ~ 127 byte frames transmitted.

TX 128 ~ 255 Bytes: Displays the total number of 128 ~ 255 byte frames transmitted.

TX 256 ~ 511 Bytes: Displays the total number of 256 ~ 511 byte frames transmitted.

TX 512 ~ 1023 Bytes: Displays the total number of 512 ~ 1023 byte frames transmitted.

TX 1024 ~ 1518 Bytes: Displays the total number of 1024 ~ 1518 byte frames transmitted.

TX 1519 ~ 1522 Bytes: Displays the total number of 1519 ~ 1522 byte frames transmitted.

TX Jumbo Packets: Displays the total number of Jumbo packets transmitted.

TX Single Collision: Displays the total number of single collision packets transmitted.

TX Multiple Collision: Displays the total number of multiple collision packets transmitted.

TX Excessive Col: Displays the total number of excessive collision packets transmitted.

TX Late Collision: Displays the total number of late collision packets transmitted.

TX Deferred: Displays the total number of deferred collision packets transmitted.

Select: Used to select what ports statistics are being displayed.

Refresh Interval: The user can define the amount of time the switch will take to update

the ports statistics this is measured in seconds and ranges from 3 –

10.

Reset: The reset button is located at the top right hand side of the screen

and is used to reset the counters back to zero.