User manual

GSS Series User Manual

3.1 Web Management Home Overview

Once you have entered a valid username and password and logged into the switch the

System Configuration page will be displayed, this is the default page, it will be displayed every

time that you log into the switch.

On the left hand side of the screen you will see a menu structure used to Configure, Monitor

and manage your switch.

System

• System Information – Displays system information including Model Name, Firmware

Version, Hardware Version, MAC Address etc. Also used to configure IP and SNMP

settings.

• IP – Used to configure the switches IP address settings.

• Time – Used to configure time settings for the switch.

• Account – Used to configure account access to the switch.

Port

• Status – Displays the link status of each port.

• Configuration – Used to configure port speed and flow control settings.

• Simple Counter – Displays basic port statistics.

• Detailed Counter - Displays detailed port statistics.

Storm – Used to configure broadcast storm settings.

Mirror – Used to configure port mirroring.

Filter

• Bad Length – Used to enable filtering features.

• Unknown Encapsulation – Used to enable filtering features.

• Unknown Ether-Type – Used to enable filtering features.

• Unknown IP Protocol – Used to enable filtering features.

• IPv4 Options – Used to enable filtering features.

• Unknown Source – Used to enable filtering features.

QoS

• Priority – Used to configure priority levels for each QoS class.

• Policer – Used to configure policy QoS settings for each port.

• Shaper – Used to configure shaper QoS settings for each port.

• Flow – Used to configure flow QoS settings for each port.

• Police Flow – Used to configure police flow QoS settings for each port.

• Mark – Used to configure mark QoS settings for each port.

• Mark Enable – Used to configure mark enable QoS settings for each port.

ACL

• ACL Mode – Used to configure Access Control List mode.

• ACL/VLAN Mapping – Used to map ACL to a particular VLAN.

• ACL Rule – Used to configure ACL rules.