User manual

APS User Manual
92
Parameter Description
Configuration Name: The name identifying the VLAN to MSTI mapping. Bridges must share the
name and revision, as well as the VLAN-to-MSTI mapping configuration in
order to share spanning trees for MSTI's (Intra-region). The name must be
no more than 32 characters.
Configuration Revision: The revision of the MSTI configuration. This must be an integer between 0
and 65535.
MSTI: The bridge instance. The CIST is not available for explicit mapping of VLAN’s,
as it will receive the VLANs that have not been manually mapped to an
MSTI.
VLAN’s Mapped: The list of VLANs mapped to the MSTI. The VLANs must be separated with
comma and/or space. A VLAN can only be mapped to one MSTI. An unused
MSTI should just be left empty.
Reset Button: Used to reset unsaved changes to original configuration.
Apply Button: Used to save the settings configured on this page.
Fig. 39 Example MSTI Configuration