User manual

APS User Manual

1.2.3-2-3 Port Status

This section displays the current port status of the LACP groups.

Web Interface

To view the Port status via the Web Interface:

1. Click Configuration, Aggregation, LACP and Port Status.

2. If you want to auto-refresh the information you will need to check the Auto-Refresh tick box.

3. Click Refresh to manually refresh the information.

Parameter Description

Port: Physical port of the switch.

LACP: If LACP is enabled on the port Yes will be shown if LACP is disabled then No

will be displayed.

Key: The key assigned to this port. Only ports with the same key can be

aggregated together.

Aggr ID: The Aggregation ID assigned to this group.

Partner System ID: The partners system ID. (MAC Address)

Partner Port: The port number of the partner device.

Fig. 35 Port Status