User manual

APS User Manual

Parameter Description

Source MAC Address: The Source MAC address can be used to calculate the destination

port for the frame. Check to enable the use of the Source MAC address, or

uncheck to disable.

By default, Source MAC Address is enabled.

Destination MAC

Address: The Destination MAC Address can be used to calculate the destination port

for the frame. Check to enable the use of the Destination MAC Address, or

uncheck to disable.

By default, Destination MAC Address is disabled.

IP Address: The IP address can be used to calculate the destination port for the frame.

Check to enable the use of the IP Address, or uncheck to disable.

By default, IP Address is enabled.

TCP/UDP Port Number: The TCP/UDP port number can be used to calculate the destination port for

the frame. Check to enable the use of the TCP/UDP Port Number, or uncheck

to disable.

By default, TCP/UDP Port Number is enabled.

Group ID: Indicates the group ID for the trunk group. Up to 13 trunk groups can be

created. Each port can only belong to one trunk group. The Group ID normal

is used when no trunk groups are to be used.

Fig. 32 Configuring a static trunk group