User manual

APS User Manual
75
1.2.2-4 ACL Status
The section displays the current ACL rules configured on the switch
Web Interface
To view the ACL Rate rules via the Web Interface:
1. Click Configuration, ACL and ACL Status.
2. If you would like the page to auto-refresh the ACL Information, check the Auto-Refresh tick
box at the top of the page, or alternatively hit the refresh button to refresh the page
manually.
Parameter Description
User: Indicates the ACL user.
Ingress Port: Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.
Frame Type: Indicates the frame type of the ACE. Possible values are:
Any: The ACE will match any frame type.
EType: The ACE will match Ethernet Type frames. Note that an Ethernet
Type based ACE will not get matched by IP and ARP frames.
ARP: The ACE will match ARP/RARP frames.
Fig. 31 Viewing the Access Control List Rules