User manual

APS User Manual

use ACL-based mirroring, enable the Mirror parameter on the ACE

Configuration page. Then open the Mirror Configuration page, set the "Port

to mirror on" field to the required destination port, and leave the "Mode"

field Disabled.

Logging: Enables logging of matching frames to the system log.

Default: Disabled

Open the System Log Information menu to view any entries stored in the

system log for this entry. Related entries will be displayed under the "Info"

or "All" logging levels.

Shutdown: Shuts down a port when a matching frame is seen.

Default: Disabled

Counter: Shows the number of frames which have matched any of the rules defined

for this ACL.

VLAN Parameters

802.1Q Tagged: Specifies whether or not frames should be 802.1Q tagged. Options: Any,

Disabled, Enabled;

Default: Any

VLAN ID Filter: Specifies the VLAN to filter for this rule. Options: Any, Specific (1-4095);

Default: Any

Tag Priority: Specifies the User Priority value found in the VLAN tag (3 bits as defined by

IEEE 802.1p) to match for this rule. Options: Any, Specific (0-7);

Default: Any

Reset Button: Used to reset unsaved changes to original configuration.

Apply: Used to save the settings configured on this page.

Cancel: Used to disregard any changes made.