User manual

APS User Manual
72
TCP FIN: Specifies the TCP "No more data from sender" (FIN) value for this rule.
Any: any value is allowed.
0: TCP frames where the FIN field is set must not match this entry.
1: TCP frames where the FIN field is set must match this entry.
Default: Any
TCP SYN: Specifies the TCP "Synchronize sequence numbers" (SYN) value for this rule.
Any: any value is allowed.
0: TCP frames where the SYN field is set must not match this entry.
1: TCP frames where the SYN field is set must match this entry.
Default: Any
TCP RST: Specifies the TCP "Reset the connection" (RST) value for this rule.
Any: any value is allowed.
0: TCP frames where the RST field is set must not match this entry.
1: TCP frames where the RST field is set must match this entry.
Default: Any
TCP PSH: Specifies the TCP "Push Function" (PSH) value for this rule.
Any: any value is allowed.
0: TCP frames where the PSH field is set must not match this entry.
1: TCP frames where the PSH field is set must match this entry.
Default: Any
TCP ACK: Specifies the TCP "Acknowledgment field significant" (ACK) value for this
rule.
Any: any value is allowed.
0: TCP frames where the ACK field is set must not match this entry.
1: TCP frames where the ACK field is set must match this entry.
Default: Any
TCP URG: Specifies the TCP "Urgent Pointer field significant" (URG) value for this rule.
Any: any value is allowed.
0: TCP frames where the URG field is set must not match this entry.
1: TCP frames where the URG field is set must match this entry.
Default: Any
IP TTL: Specifies the time-to-Live settings for this rule.
Any: any value is allowed.
Non-zero: IPv4 frames with a TTL field greater than zero must match this
entry.
Zero: IPv4 frames with a TTL field greater than zero must not match this
entry.
Default: Any