User manual

APS User Manual
71
1: ARP/RARP frames where the PRO is equal to IP (0x800) must match this
entry.
Default: Any
IPv4 – MAC Parameters
DMAC Filter: The type of destination MAC address. Options: Any, MC - multicast, BC -
broadcast, UC - unicast, Specific
Default: Any
IPv4 – IP Parameters
IP Protocol Filter: The type of destination MAC address. Options: Any, MC - multicast, BC -
broadcast, UC - unicast, Specific
Default: Any
The following additional fields are displayed when these protocol filters are selected.
ICMP Parameters
ICMP Type Filter: Specifies the type of ICMP packet to filter for this rule. Options: Any,
Specific: 0-255;
Default: Any
ICMP Code Filter: Specifies the ICMP code of an ICMP packet to filter for this rule. Options:
Any, Specific (0-255);
Default: Any
UDP Parameters
Source Port Filter: Specifies the UDP source filter for this rule. Options: Any, Specific (0-65535),
Range (0-65535);
Default: Any
Dest. Port Filter: Specifies the UDP destination filter for this rule. Options: Any, Specific (0-
65535), Range (0-65535);
Default: Any
TCP Parameters
Source Port Filter: Specifies the TCP source filter for this rule. Options: Any, Specific (0-65535),
Range (0-65535);
Default: Any
Dest. Port Filter: Specifies the TCP destination filter for this rule. Options: Any, Specific (0-
65535), Range (0-65535);
Default: Any