User manual

APS User Manual
62
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
Logging: Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is Disabled.
Please note that the System Log memory size and logging rate is limited.
Shutdown: Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is Disabled.
State: Used to enable or disable the selected port. The allowed values are:
Enabled: Enables the port and allows packets to be sent and received.
Disabled: Disables the port.
The default value is Enabled.
Counter: Displays the amount of frames that match this ACE.
Refresh Button: Used to refresh the values displayed in the counter section.
Clear Button: Used to clear the counters.
Reset Button: Used to reset unsaved changes to original configuration.
Apply: Used to save the settings configured on this page.