User manual

APS User Manual
61
Parameter Description
Port: Physical port of the switch.
Policy ID: Select the Policy to apply to this port. The allowed vales are 1 through 8.
The default value is 1.
Action: Select whether forwarding is permitted (Permit) or denied (Deny).
The default value is Permit.
Rate Limiter ID: Select which rate limiter to apply on this port. The allowed values are
Disabled or the values 1 through 16.
The default value is Disabled.
Port Redirect: Select which port frames are copied on. The allowed values are Disabled or a
specific port number.
The default value is Disabled.
Mirror: Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Fig. 27 Port ACL Configuration