User manual

APS User Manual
47
1.2 Configuration
This chapter describes the network configuration options available in the APS Series of switches. All
Layer 2 features such as VLAN’s, Port Trunking, IGMP, ACL’s and QoS can be configured in this section.
1.2.1 Port
The Port section is used to configure specific port parameters and view statistics related to individual
ports.
1.2.1-1 Configuration
Use this section to configure parameters for each of the ports. You can force the speed of a port, set
the maximum frame size, set frame collision parameters and also configure the power saving
options for each of the ports.
Web Interface
To configure the ports of the switch via the Web Interface:
1. Click Configuration, Port and Configuration.
2. Configure the parameters needed for your network.
3. Click the Apply button to save your changes or the Reset button to revert to previous
settings.
Fig. 20 Port Configuration