User manual

APS User Manual
45
Parameter Description
Trap Version: Select the required Trap Version SNMP v1, v2c or v3 trap.
Server IP: Enter the IP Address of the server that will receive the SNMP Traps.
UDP Port: Enter the UDP port used for sending the SNMP Traps, default is 162.
Community/Security: Enter the Community/Security name, this value can be 1 to 32 characters in
length.
Security Level: Select the type of information you want sent in the SNMP Trap. Options are
Emergency, Alert, Critical, Error, Warning, Notice, Info and Debug.
Security Level: Set the required security level. Possible security options:
NoAuth, NoPriv: No Authentication and No Privacy
Auth, NoPriv: Authentication and No Privacy
Auth, Priv: Authentication and Privacy
Authentication Protocol: Indicates the Authentication protocol used for the Trap. Options are:
MD5: Select to use the MD5 Authentication Protocol
SHA: Select to use the SHA Authentication Protocol
Authentication Password: The password used for both the MD5 and SHA Authentication Protocols.
The MD5 protocol allows a password length of 8 to 32 characters and the
SHA protocol allows a password length of 8 to 40 characters.
Privacy Protocol: Indicates the Privacy protocol used for the user. Options are:
DES: Select to use the DES encryption method
Fig. 19 Add a new SNMP Trap