User manual

APS User Manual
44
Write View Name: The name of the MIB view defining the MIB objects for which this
request may potentially set new values. The allowed string length is
1 to 32.
1.1.6-8 Trap
This section is used to create SNMP traps.
Web Interface
To configure SNMP Traps via the Web Interface:
1. Click System, SNMP and Trap.
2. Select an SNMP Trap number and click the number to add the trap information. Up to 6
traps can be configured.
3. If you have any Trap entries that you would like to delete, click on the delete button next to
the Trap that you would like to delete.
4. Click the Save button to apply changes.
Parameter Description
Delete: Click the delete button to delete an existing Trap.
No: This identifies the Trap number, click on the Trap number to create a new
SNMP Trap. Up to 6 Traps can be created.
Fig. 18 SNMP Traps