User manual

APS User Manual
35
1.1.6-4 Users
SNMPv3 brings some important and much needed authentication and encryption options to the
SNMP protocol. This section is used to configure SNMPv3 users.
Web Interface
To configure SNMP Users via the Web Interface:
1. Click System, SNMP and Users.
2. Click on Add New User to configure a new user. Enter the required user details.
3. Click Save to apply your changes.
Parameter Description
Delete: Select the tick box and click the apply button to delete a User.
Add New User: Used to add a new user.
Fig. 18 SNMPv3 Users