User manual

APS User Manual

1.1.6-2 Configuration

This section is used to configure the GET and SET community names. In this section you can also

enable or disable the SET community. By doing this the NMS server will not be able to write

configuration parameters to the switch.

Web Interface

To configure the GET and SET communities names via the Web Interface:

1. Click System, SNMP and Configuration.

2. Enter the GET and SET community names.

3. Select whether you want to enable or disable the SET function, via the drop down box.

4. Click the Apply button to save your changes.

Parameter Description

Get Community: Set the community name for the SNMP Get function.

Set Community: Set the community name for the SNMP Set function.

Enable/Disable: Used to Enable or Disable the SNMP Set function.

Fig. 15 SNMP Community Configuration